COVID-19, supply shortages, & a surge in demand are causing longer-than-normal ship times. Rest assured that your order is our top priority. READ MORE…
PLEASE NOTE: Commercial carriers such as UPS, FedEx, and other carriers have suspended Delivery Service Guarantees until further notice. As a result, we are currently unable to refund shipping costs in the event your order delivery is delayed.

IFS Eliminator Kit

$2,009.70
SKU
IFS ELIMINATOR KIT

IFS Eliminator Kit

There are a lot of choices on the market for solid axle conversion. So what makes our kits stand out? We feature the highest quality parts and the most complete kit at the best price anywhere.

Our SAS kits include a front diff armor plate, upper axle gusset, wheel bearing, and knuckle service kits. Items most others charge extra for. To install your solid axle kit you're going to need a rear matching lift kit, solid front axle from a 79-85 Pickup or 4Runner, and a long spline drive shaft.

We offer our kits in three different heights. The hangers and shackles included with each kit add one inch of lift. Thus our 3" spring kit has 4" lift and our 4" kit would be 5" of lift.

Note: On V6 installations, we recommend moving the front hanger forward 3/4". This allows the tie rod to clear the stock 4wd oil pan. It also kicks the shackles forward slightly helping the springs to carry the heavier load of the V6 motor.

SAS Kit Includes:

  • Front Leaf Springs (your choice of 3" 4" or 5")
  • High Steer Crossover Steering Kit
  • Front Drop Hanger with Greaseable Bolts
  • Greaseable 5" Shackles
  • Frame Tubes & Jigs
  • Steering Stabilizer Kit
  • U-bolt Flip Kit
  • Shock Hoops (2)
  • Bilstein Shocks (2)
  • Front Brake Lines (2)
  • Vented Rotors (2)
  • Bumpstop Extensions (2)
  • Wheel Spacers (2)
  • Bumpstops (2)
  • Front Axle Gusset
  • Axle Diff Armor
  • Knuckle Service Kit
  • Wheel Bearing Kit (2)
  • Motor Mount Cover Plates
  • Spring Pad

Note: Now our front 5" springs are available in a heavy-duty version with a 25% higher spring rate. We have added a 7th leaf and readjusted the length of the leaves to match. If you are running a larger v6 or v8 motor you will appreciate the extra weight carrying capacity of these springs.

Available in Left or Right-Hand Drive. This nomenclature refers to the position of the steering wheel as seen from inside the vehicle.

 

⚠ WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

SAS Kit Includes:

  • Front Leaf Springs (your choice 3" 4" or 5")
  • High Steer Crossover Steering Kit
  • Front Drop Hanger with Greasable Bolts
  • Greasable 5" Shackles
  • Frame Tubes & Jigs
  • Steering Stabilizer Kit
  • U bolt Flip Kit
  • Shock Hoops (2)
  • Bilstein Shocks (2)
  • Front Brake Lines (2)
  • Vented Rotors (2)
  • Bumpstop Extensions (2)
  • Wheel Spacers (2)
  • Bumpstops (2)
  • Front Axle Gusset
  • Axle Diff Armor
  • Knuckle Service Kit
  • Wheel Bearing Kit (2)
  • Motor Mount Cover Plates
  • Spring Pad
  • Instructions
Note: On V6 installations, we recommend moving the front hanger forward 3/4". This allows the tie rod to clear the stock 4wd oil pan. It also kicks the shackles forward slightly helping the springs to carry the heavier load of the V6 motor.

Note: Now our front 5" springs are available in a heavy-duty version with a 25% higher spring rate. We have added a 7th leaf and readjusted the length of the leaves to match. If you are running a larger v6 or v8 motor you will appreciate the extra weight carrying capacity of these springs.

  • 1979-1995 Toyota Pickup (All Engines)
  • 1985-1995 Toyota 4Runner (All Engines)
  • Toyota Solid Front Axle Housing
  • Rock Assault™ Front Axle Housing

All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.

Please read and review our return and warranty requirement document before sending in products.

Warranty Exclusions


Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.

Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.

Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.

All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.

    To begin your warranty claim:
  • Please contact Trail-Gear Inc. at 559-252-4950 or email [email protected] prior to returning any product under warranty to verify that warranty is still in effect.
  • Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
    Ship all products to:
    ATTN: WARRANTY
    5356 E. Pine Avenue
    Fresno, Ca 93727.
  • Please place a clearly marked copy of the original invoice on the outside of the package.
  • Please include a short note stating the problem you are experiencing.

If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.

If you are an international customer, please email the warranty department at [email protected] to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.