Trail-Gear Power Flow Steering Box
Power Flow IFS Steering Box
Trail-Gear's new Power Flow IFS Steering Box has been designed and engineered to provide ultimate performance making it the perfect choice for those with solid axle vehicles who want to install high-steer. This is not a 30-year-old rebuilt steering box, but a completely new unit. While designed to be a direct replacement for the 86-88 box, this steering box will also work in the 89-95 application by adjusting the steering input shaft. We specifically chose to base our design on the 86-88 model for its ease of service. Each box comes pre-drilled and tapped making it ideal for high-steer applications with or without ram assist. If you are not using ram assist, just leave in the pre-installed plugs. When transitioning to ram assist, the removable plugs not only eliminate the need to remove the box from the truck to drill and tap but also eliminate any chance of contaminating the system with metal shavings.
Note: If using in ram assist applications you will need to purchase 2 of our 1/4" pipe to #6 JIC fittings (130263-1-KIT) to connect the ram assist hoses.
These steering boxes are compatible with LHD vehicles only. They will not work with RHD vehicles.
AVAILABLE PART NUMBERS:
- 303951-1 - 1986-1988 Toyota Steering Box
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- 100% new box (not a rebuilt unit)
- Pre-drilled and tapped with removable plugs installed allowing for applications with or without ram assist.
- Direct replacement for 86-88 Toyota Pickup/4Runner steering box.
- Lock-to-Lock Turns: 4-3/4
- Input Spline Quantity: 36
- Output Spline Quantity: 48
- 86-88 Toyota Pickup/4Runner (replaces box on 89-95 models)
Download installation instructions here.Installation Instructions
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Please read and review our return and warranty requirement document before sending in products.
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
- Please contact Trail-Gear Inc. at 559-252-4950 or email email@example.com prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, Ca 93727.
Ship all products to:
- Please place a clearly marked copy of the original invoice on the outside of the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at firstname.lastname@example.org to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.