T-Case Gear Set, 4.16:1 (Jimny JA11)

Rating:
% of 100
$826.62
Limited Stock!
SKU
303924-3-KIT

Jimny 4.16 T-Case Gear Set

Low range gears are critical for technical off-road driving. Our Jimny low range gear kit is the highest quality gear set available. Low Range reduction is 4.16:1 (84% low range reduction). High range reduction is 12%. No welded or second rate, gears here. These are strong, run quiet and take a huge amount of abuse. This complete kit includes three new precision cut gears, counter shaft, needle bearings, shims, o-ring, gaskets, and input/output seals. Heavy duty front output shaft recommended (Click Here).

Choosing the right material for our gears was our top priority. Gears that perform well under load and street driving require a high quality steel alloy material. We chose Japanese alloy SCM415 for its great strength and wear resistance. SCM415 outperforms the 8620 material in yield and ultimate tensile strength resulting in a gear that is less prone to chipping or cracking. SCM415 also retains its strength under high-temperature use. High carbon materials such as SCM420 or 8620 are not the best choice in our experience and opinion as they do not carburize as well and can become brittle.

Note: The recommended tire size for the 4.16 gears is 29"-30"

Will not fit in Jimny chain-drive transfer cases.


⚠ WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Specifications:

  • Low Range reduction is 4.16 to 1 (84% low range reduction). High Range reduction is 12%
  • Includes new precision cut gears, counter shaft, needle bearings, shims, o-ring, gaskets, and input/output seals
  • Heavy Duty Samurai T-Case Output Shaft recommended
  • Made out of Japanese SCM415 alloy for its greate strength and wear resistance
  • SCM415 outperforms the 8620 material in yield and ultimate tensile strength

Application Data

  • 1990-1995 Suzuki Jimny JA11 4WD
  • 1995-1998 Suzuki Jimny JA12 4WD
  • 1986-1990 Suzuki Jimny JA71 4WD

Will not fit in Jimny chain-drive transfer cases.

All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.

Please read and review our return and warranty requirement document before sending in products.

Warranty Exclusions


Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.

Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.

Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.

All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.

    To begin your warranty claim:
  • Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
  • Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
    Ship all products to:
    ATTN: WARRANTY
    5356 E. Pine Avenue
    Fresno, CA 93727.
  • Please place a clearly marked copy of the original invoice inside the package.
  • Please include a short note stating the problem you are experiencing.

If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.

If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2024 Trail-Gear, Inc. All rights reserved.