Trail-Gear Power Flow 1650psi Power Steering Pump with Serpentine Pulley

Rating:
% of 100
$432.09
100+ In Stock
SKU
TG Power Flow 1650psi PSP with Serpentine Pulley

Trail-Gear Power Flow‚Ñ¢ 1650psi Power Steering Pump with Serpentine Pulley

Trail-Gear’s new Power Flow 1650 psi pump has been designed and engineered to provide ultimate performance. The body of the pump is constructed of steel to increase reliability and decrease wear. It is also equipped with oversized bushings for high H.P. motors and applications with high pump shaft side loads. Trail-Gear’s Power Flow Pumps have one of the highest flow rates in the industry. The Power Flow pump has been endurance tested at 400°F and has a consistent steady flow across all rpm’s and will not bypass early. In addition, the Power Flow pump has heavy-duty internals and is a direct replacement for "TC" and "CB" style pumps.

The pulley is precision CNC machined from 6061 T6 Aluminum and anodized black for corrosion resistance. The center hole bore diameter is .660" and the total outside diameter of the pulley is 4-3/4".

This serpentine pulley fits 2.7L and 3.4L Tacoma applications and many other common serpentine belt applications that use a 4 rib belt.

Available Options:

  • 2.7L engine -¬†300154-1-KIT
  • 3.4L engine -¬†130612-KIT

NOTES:

  • Does not fit in stock Tacoma bracket. If you do not already have a Power Flow pump, Trail-Gear recommends purchasing our Tacoma Power Flow PS Pump Kit.
  • Using anything other than a power steering pulley installer to install your pulley on this pump will void the warranty.
Note. If you are using our Rock Assault 9 Housing, you will need to use the 10" Ram for your steering setup.
Note. Use only standard power steering fluid with this product. The use of ATF fluid, semi-synthetic fluid, or full synthetic fluid is not recommended and will void the warranty.

 

Caution:  Maximum pump RPM is 7,000 RPM.  Do not drive the pump beyond 7,000 RPMs.  If you are using this pump on a custom build, you will need to calculate the correct pump pulley size to ensure you do not exceed 7,000 RPMs on the pump.  Refer to the Instruction tab for instructions on how to do this or contact Technical Support at 1.877.4X4.TOYS or 559.252.4950 or e-mail tech@trail-gear.com

NOTE: PS pump is designed for clockwise operation.

‚ö† WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

  • Puts out 1,650 PSI of pressure
  • The anodized aluminum pulley on this pump is designed to fit Toyota applications
  • Each pump is bench tested to ensure quality
  • This pump is designed for use in a hydraulic ram assist application

Note: Using anything other than a power steering pulley installer to install your pulley on this pump will void the warranty. Never use ATF fluid or a semi-synthetic blend. This will void the warranty. OK to use standard power steering fluid.

Caution:  Maximum pump RPM is 7,000 RPM.  Do not drive the pump beyond 7,000 RPMs.  If you are using this pump on a custom build, you will need to calculate the correct pump pulley size to ensure you do not exceed 7,000 RPMs on the pump.  Refer to the Instruction tab for instructions on how to do this or contact Technical Support at 1.877.4X4.TOYS or 559.252.4950 or e-mail tech@trail-gear.com

Universal

Trail-Gear 12-Month Limited Warranty Image

Trail-Gear 12-Month Limited Warranty Policy

This product carries our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date.

Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.

Please download, review and follow the instructions outlined in our Return, Exchange, Warranty Form before shipping any product(s).

Warranty Exclusions

Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.

Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.

Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.

All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.

Warranty Claim Procedures

  • Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product(s) under warranty to verify that warranty is still in effect.
  • Please place a clearly marked copy of the original invoice on the outside of product packaging.
  • Please include a short note stating the problem you are experiencing.
  • Products must be shipped back to Trail-Gear Inc. at the expense of the customer.

Shipping Address

Ship all products to:

Trail-Gear, Inc.
Attn: Warranty
5356 E. Pine Avenue
Fresno, CA 93727

Important Notes:

  • If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. Completing the steps above will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repair.
  • Customers outside of the United States should email the warranty department at sales@trail-gear.com to receive further instructions. These customers may have the option to "field destroy" an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2023 Trail-Gear, Inc. All rights reserved.