Bilstein 6112 Pair For 1999-2006 Tundra & 2001-2007 Sequoia

Rating:
0% of 100
As low as $826.00
6 In Stock
Only %1 left
SKU
Bilstein 6112 Pair For 1999-2006 Tundra & 2001-2007 Sequoia

Bilstein 6112 Pair For 1999-2006 Tundra & 2001-2007 Sequoia

Designed for the serious off-road adventure seeker, the all-new BILSTEIN 6112 Series is the ultimate suspension solution. The 6112 Series optimizes off-road and on-road capabilities with a specially tuned performance coil matched with a monotube damper featuring a massive 60mm digressive piston for increased damping control. This kit features an adjustable spring seat which allows vehicle leveling, larger tires, and increased ground clearance.

These units require your existing strut upper mount plates. They come with upper stem cushions and upper/lower cushion washers. If you don't want to disassemble your factory struts to get these pieces, we have all of them available separately. Optionally, we can assemble these struts for you so that they're ready to bolt in, or you can purchase them unassembled. We have 5100 and 5160 rear shocks available to complete your setup.

Bilstein advises that these are good for 0-2" lift with the supplied 650LB Rate X 15.6" coils. Optionally, we have 700LB rate X 16" coils available separately for customers needing additional spring rates.

AVAILABLE OPTIONS:

• WOR-306989 - Fully Assembled option includes (2) struts with 650-lb Bilstein springs, new strut mounts, upper stem cushion, cushion washers, and assembly labor.
• WOR-308486 - Fully Assembled option includes (2) struts with 700-lb Bilstein springs, new strut mounts, upper stem cushion, cushion washers, and assembly labor.
• BIL-47-310049 - Unassembled option is a set of (2) Bilstein struts, 650-lbs springs, upper stem cushions, & cushion washers.

WHEELERS CAN PRE-ASSEMBLE THESE FOR EASY INSTALLATION

Bilstein BIL-47-310049

IMPORTANT NOTES:

  • Ride heights indicated are typical. Actual ride height is influenced by the factory suspension components the vehicle is equipped with and its condition; optional equipment and accessories on your vehicle, and other vehicle modifications such as replacement coil springs, wheel and tire combinations, aftermarket bumpers, etc.
  • When purchasing this item, you MUST include your desired clip setting in the ORDER COMMENTS.

DISCLAIMER: The customer is solely responsible for selecting the clip setting and it is recommended that they consult Wheeler’s Customer Service before selecting their clip setting.

These struts are build-to-order items. A cancellation fee of 20% will be charged if the order is cancelled after strut assembly begins.

⚠ WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Designed for the serious off-road adventure seeker, the all-new BILSTEIN 6112 Series is the ultimate suspension solution. The 6112 Series optimizes off-road and on-road capabilities with a specially tuned performance coil matched with a monotube damper featuring a massive 60mm digressive piston for increased damping control. This kit features an adjustable spring seat which allows vehicle leveling, larger tires, and increased ground clearance.
These units require your existing strut upper mount plates. They come with upper stem cushions and upper/lower cushion washers. If you don't want to disassemble your factory struts to get these pieces we have all of them available separately. Optionally, we can assemble these struts for you so that they're ready to bolt in, or you can purchase them unassembled. We have 5100 and 5160 rear shocks available to complete your setup.
Bilstein advises that these are good for 0-2" lift with the supplied 650LB Rate X 15.6" coils. Optionally, we have 700LB rate X 16" coils available separately for customers needing additional spring rate.

WHEELER'S CAN PRE-ASSEMBLE THESE FOR EASY INSTALLATION

TOYOTA TUNDRA
(1999-2006)

1999 Toyota Tundra
2000 Toyota Tundra
2001 Toyota Tundra
2002 Toyota Tundra
2003 Toyota Tundra
2004 Toyota Tundra
2005 Toyota Tundra
2006 Toyota Tundra
TOYOTA SEQUOIA
(2001-2007)

2001 Toyota Sequoia
2002 Toyota Sequoia
2003 Toyota Sequoia
2004 Toyota Sequoia
2005 Toyota Sequoia
2006 Toyota Sequoia
2007 Toyota Sequoia

Bilstein Warranty Image

Bilstein Warranty Policy - North America

The following limited warranty from BILSTEIN applies to all purchasers (hereinafter “Purchaser”) who have purchased a BILSTEIN aftermarket product (hereinafter “Product”) in North America (hereinafter “NA”) from a BILSTEIN distributor. This warranty is non-transferable.

BILSTEIN warrants that Products purchased from a BILSTEIN distributor in NA shall be free from defects in design, material and workmanship for as long as the original purchaser owns the product and it is installed on the original vehicle for which the product was purchased.

Within the warranty period, the authorized BILSTEIN distributor shall be obligated to repair or replace a defective Product at its discretion. This does not apply if the product has been used improperly and contrary to BILSTEIN’s instructions. Further claims for defects by Purchaser are excluded.

To exercise its warranty rights, Purchaser must contact the BILSTEIN distributor in NA from whom the Product was originally purchased to request the return of the Product and the issue of a return goods authorization (RGA). If the Product is to be returned, Purchaser is obligated to package the Product safely for transportation, include a copy of the invoice as proof of purchase, affix the RGA number visibly and legibly to the outside of the package and return the product to the BILSTEIN distributor at its own expense. Payment by BILSTEIN or the BILSTEIN distributor of import costs (customs or other government fees, tariffs, handling fees) incurred in connection with international returns is expressly excluded.

BILSTEIN or the BILSTEIN distributor shall under no circumstances be liable for consequential damages (such as, but not limited to, labor charges and/or lost profits) resulting from the use, misuse or inability to use the Product or from defects of the Product. This limitation of liability does not apply to injuries to persons, in the event of willful intent or gross negligence, or if a material, contractual obligation was violated.

In the event of improper use, in particular installation in vehicles not recommended by BILSTEIN, track racing or off-road use (unless the product is expressly designed for such use), all warranty claims are void.


Warranty Restrictions

The limited warranties set forth above do not cover normal wear and tear and are non-transferable.

Exclusions include:

  • Surface finish, boot or mounting hardware such as, but not limited to, rubber bushings, bearings, valve shims
  • Original equipment shock absorbers - which are warranted by the vehicle manufacturer
  • Damage caused by improper installation
  • Damage caused to non-motorsports product as a result of racing, driving competition or off-road use
  • Use on modified or other than Bilstein-recommended vehicles
  • Bent or broken rods showing abuse or abnormal wear
  • Cosmetic damage such as scratches, notches, dents and corrosion
  • Damage to products which have been altered without the written approval of BILSTEIN or the BILSTEIN distributor
  • Damages caused by road hazards, accidents, improper use, water, flooding, fire or other natural phenomena or external causes

Warranty Categories

BILSTEIN warrants to the original retail purchaser that, for the periods specified below, each gas pressure shock shall be free from defects in material and workmanship. This warranty is non-transferable and does not cover normal wear and tear.

Proof of purchase is required to process warranty. Any implied warranty of merchantability, fitness or fitness for particular purpose, except as may be prohibited by applicable law, is likewise limited in duration to timeframe specified below, from the date of original retail purchase.

Some States do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you.


Limited Lifetime Warranty

  • B4 OE Replacement
  • B3/B4 OE Replacement Air Suspension (Spring and Strut)
  • B6 / B6 Performance
  • B8 Performance Plus
  • B12 Series
  • B14 (PSS)
  • B16 (PSS9 & PSS10)
  • B6 4600
  • B8 5100
  • B8 5100 (Ride Height Adjustable)
  • B8 5112
  • B8 6112

Limited 2 Year Warranty

  • B1 Air Compressor (only)
  • B8 5160
  • B8 5162
  • B8 8100
  • B8 8112
  • B3 Coil Springs
  • Steering Racks

Limited 90-Day Warranty

  • B1 (excluding Air Compressor)
  • Clubsport
  • Motorsport
  • B8 5125
  • B8 5165
  • M 7100
  • B8 8125
  • B8 9200
  • B8 9300
  • Service Repairs

To view BILSTEIN's complete Warranty Promise and Processing Procedures, please visit the BILSTEIN Warranty page.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2023 Trail-Gear, Inc. All rights reserved.