Wheeler’s 2887 Front Coil Springs for 05-23 Tacoma & 03-24 4Runner
Wheeler’s 2887 Front Coil Springs for 05-23 Tacoma & 03-24 4Runner
Toyota enthusiasts loved the variety of 288X series springs that were made by a certain Australian Off-Road company and were frustrated to find out they now have limited availability or have been discontinued altogether by that same Australian company. Wheeler’s has decided to bring these springs back into production to serve the Toyota off-road community. Even better, we tooled these springs up here and make them in the USA!
These springs are ideal for use in 2nd/3rd gen Tacoma & 4th/5th gen 4Runner applications with aftermarket Bilstein, Fox, Eibach, or ARB Nitrocharger struts. They will provide approximately 2-2.5” of lift on a 2005-2015 Tacoma, and 2” of lift on a 2016-2023 Tacoma. On the 2003-2009 4Runner with a bull bar & winch, you will get approximately 2-2.25” of lift. You can expect approximately 2.5”-3” of lift on 2010-2024 4Runner with 230+ lbs of bull bar & winch.
Sold individually and in sets of (2) springs.
AVAILABLE OPTIONS:
- WOR-2887 - Wheeler’s 2887 Front Coil Springs for 05-23 Tacoma & 03-24 4Runner - Single
- WOR-312371 - Wheeler’s 2887 Front Coil Springs for 05-23 Tacoma & 03-24 4Runner - Pair
- For use with the following struts ONLY:
- Using these springs with stock struts is not recommended.
- Will not work with ARB Nitrocharger Plus struts.
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Spring Rate = 590 lbs/inch
- Free Height = 15.75” [400 mm]
- Number of Turns = 9.75 Approx.
- Wire Diameter = .65” [17 mm]
- Material = SAE 9254 Cold-Wound Spring Steel
- Finish = Black Powder Coat
- Shot-peened for long spring life.
- Sold individually or as a set of (2) springs.
- Made in USA.
- Direct replacement for ARB 2887 coil springs.
| NOTE: For use with Bilstein 5100 struts (24-280785, 24-324359, 24-239370, 24-328258, 24-263108), ARB Nitrocharger (90000, 90010, 90021) struts, Eibach Pro-truck struts (E60-82-008-02-10, E60-82-007-02-10, E60-82-069-01-10, E60-82-071-02-10), and Fox Performance 2.0 Snap Ring Coilover struts (985-62-000 & 985-62-011) only. Using these springs with stock struts is not recommended. Will not work with ARB Nitrocharger Plus struts. | |
| TOYOTA TACOMA - With Bilstein 24-280785, 24-324359, or 24239370, ARB 90000 or 90021, Eibach E60-82-007-02-10, or Fox 985-62-011 struts (2005-2015) 2005 Toyota Tacoma 2006 Toyota Tacoma 2007 Toyota Tacoma 2008 Toyota Tacoma 2009 Toyota Tacoma 2010 Toyota Tacoma 2011 Toyota Tacoma 2012 Toyota Tacoma 2013 Toyota Tacoma 2014 Toyota Tacoma 2015 Toyota Tacoma |
TOYOTA TACOMA - With Bilstein 24-263108, ARB, Eibach E60-82-069-01-10, or Fox 985-62-000 struts (2016-2023) 2016 Toyota Tacoma 2017 Toyota Tacoma 2018 Toyota Tacoma 2019 Toyota Tacoma 2020 Toyota Tacoma 2021 Toyota Tacoma 2022 Toyota Tacoma 2023 Toyota Tacoma |
| TOYOTA 4RUNNER - With Bilstein 24-280785 or 24239370, ARB 90000 or 90021, or Eibach E60-82-008-02-10 struts (2003-2009) 2003 Toyota 4Runner 2004 Toyota 4Runner 2005 Toyota 4Runner 2006 Toyota 4Runner 2007 Toyota 4Runner 2008 Toyota 4Runner 2009 Toyota 4Runner |
TOYOTA 4RUNNER - With Bilstein 24-328258, ARB 90010, or Eibach E60-82-071-02-10 struts (2010-2024) 2010 Toyota 4Runner 2011 Toyota 4Runner 2012 Toyota 4Runner 2013 Toyota 4Runner 2014 Toyota 4Runner 2015 Toyota 4Runner 2016 Toyota 4Runner 2017 Toyota 4Runner 2018 Toyota 4Runner 2019 Toyota 4Runner 2020 Toyota 4Runner 2021 Toyota 4Runner 2022 Toyota 4Runner 2023 Toyota 4Runner 2024 Toyota 4Runner |
If you have any questions on the use or installation of this product please contact our customer support at (559)-549-6737.
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Please read and review our return and warranty requirement document before sending in products.
Warranty Exclusions
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts that are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
- Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer. Ship all products to:
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, CA 93727.
- Please place a clearly marked copy of the original invoice inside the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.
