Power Flow Power Steering Pump Rebuild Kit 9.4

Power Flow Steering Pump Rebuild Kit

Power steering pumps in racing, rock crawling and off-road applications undergo way more stress than those used under normal conditions. However long it takes, eventually your Power Flow pump may be out of warranty and need to be rebuilt. More often than not, a properly rebuilt steering pump will be as good as new after replacing the wear components. Trail-Gear’s Power Flow Steering Pump Rebuild Kit contains all of the internal wear components needed to rebuild any of our Power Flow PS steering pumps and get you back on the trail. With Trail-Gear’s step by step instructions, rebuilding the pump is simple.

KIT INCLUDES:

Pressure Plate
Thrust Plate
Rotor
Vanes
Ring
Alignment Pins
C-clip
Input Shaft Seal

For Genuine Power Flow 1650 psi Power Steering Pumps Only!

To verify that your pump is a genuine Power Flow Power Steering Pump, look for the markings and dimensions depicted in this image.

The following products can be rebuilt with this kit:

130304-1-KIT - Power Flow PS Pump with V-Belt Pulley
300154-1-KIT - Power Flow PS Pump with Serpentine Pulley
130303-KIT - Power Flow PS Pump without Pulley

IMPORTANT NOTES:

This Rebuild Kit contains replacements for the wear components in our Power Flow Power Steering Pumps. It is intended as a lower-cost alternative to outright replacement of the pump and is designed to rebuild older, worn, out-of-warranty Power Flow units. Please be aware, however, that replacement of the wear components may not necessarily resolve all potential damage or issues in your pump. As such, Trail-Gear cannot guarantee the results associated with the use of this product.
If your Power Flow unit is still under warranty, please click the "Warranty" Tab above and follow the instructions for a warranty claim.

WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Specifications

Includes

Application Data

Non-Vehicle-Specific

Instructions

Download Power Flow™ PS Pump Rebuild Kit Install PDF here

➨

Instructions

Warranty

Trail-Gear 12-Month Limited Warranty Image

Trail-Gear 12-Month Limited Warranty Policy

This product carries our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date.

Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.

Please download, review and follow the instructions outlined in our Return, Exchange, Warranty Form before shipping any product(s).

Warranty Exclusions

Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.

Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.

Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.

All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.

Warranty Claim Procedures

Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product(s) under warranty to verify that warranty is still in effect.
Please place a clearly marked copy of the original invoice on the outside of product packaging.
Please include a short note stating the problem you are experiencing.
Products must be shipped back to Trail-Gear Inc. at the expense of the customer.

Shipping Address

Ship all products to:

Trail-Gear, Inc.
Attn: Warranty
5356 E. Pine Avenue
Fresno, CA 93727

Important Notes:

If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. Completing the steps above will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repair.
Customers outside of the United States should email the warranty department at sales@trail-gear.com to receive further instructions. These customers may have the option to "field destroy" an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.

Reviews

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account