Trail-Gear Rock Assault Double-Ended Rams

Rating:
% of 100
$504.75
100+ In Stock
SKU
Double Ended Rams

Rock Assault™ Double Ended Ram

Through years of research, development, and testing we at Trail-Gear have developed our double ended ram to meet the tough demands of top-level rock crawling competitors and the toughest trails in the world. Based on our experience we knew exactly what we wanted in a ram, and what we didn't.

Most rams on the market only have one rod seal.  We started with the primary and secondary rod seal to ensure that fluid leakage would never be an issue. We also included two wiper seals in our design to make sure that dirt and debris stay on the trail and don't get into your steering system. In addition, we designed our ram with a Triple Lip Piston Seal for consistent steering with no drift or fluid bypassing the piston.

In true Trail-Gear style we also had to make our ram the strongest on the market, so we added a feature that you will not see on any other ram on the market.  We designed ours with a piston wear band and a rod bushing.  The bushing allows the rod to absorb much higher side loads. We also machined our piston shaft out of a single piece of 4340 chromoly. Other rams on the market use a two-piece welded or threaded piston shaft that can fail under severe loads.

Our Double Ended Ram have a 6", 8", or 10" stroke x 2.25" bore x 1.125" rod.  The cylinder has a black zinc plate finish while the rod has 3/4x16 female threads on each end and is made entirely out of 4340 chromoly material.

Rams have -8 SAE ports to accommodate different sizes of JIC fittings.  Choose between the option of #6 JIC or #8 JIC fittings.

The 6-inch ram has 6 total inches of travel and is perfect for OEM Toyota axles, all Rock Assault Toyota-style axles, and narrowed Dana 44 axles.

The 8-inch ram has 8 total inches of travel and was made to work with Dana 44s and custom length Dana 60 applications.

The 10-inch ram has 10 total inches of travel and is used for Rock Assault 9 axles and other custom axles with up to 45-degree steering radius.

Note.If you are using our Rock Assault 9 Housing, you will need to use the 10" Ram for your steering setup.

#6 JIC connectors are compatible with all Trail-Gear Power Steering hoses.

#8 JIC connectors are for high-flow off-road racing applications.  You will need to have custom hoses made to connect to Trail-Gear PowerFlow pumps and steering components.

Note. Use only standard power steering fluid with this product. The use of ATF fluid, semi-synthetic fluid, or full synthetic fluid is not recommended and will void the warranty.

⚠ WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Details

  • Primary and secondary rod seal to insure that fluid leakage would never be an issue
  • Two wiper seal design
  • Triple Lip Piston Seal for consistent steering with no drift or fluid bypassing the piston
  • The bushing allows the rod to absorb much higher side loads
  • 4340 chromoly steel piston shaft
  • Our Double Ended Ram have a 6", 8", or 10" stroke x 2.25" bore x 1.125” rod
  • The cylinder has a black zinc-plate finish while the rod has 3/4x16 female threads on each end and is made entirely out of 4340 chromoly material
  • The 6 inch ram and clevis kit has 6 total inches of travel and is perfect for Toyota's and narrowed Dana 44's.
  • The 8 inch ram and clevis kit has 8 total inches of travel and was made to work with Dana 44's and custom length Dana 60 applications.
  • The 10 inch ram and clevis kit has 10 total inches of travel and is used for buggies and comp rigs with up to 45 degree steering radius.
  • Rams use -8 SAE ports and are available with eather #6 or #8 JIC fittings

  • Non-vehicle specific

If you have any questions on the use or installation of this product please contact our customer support at (559)-549-6737

Trail-Gear 12-Month Limited Warranty Image

Trail-Gear 12-Month Limited Warranty Policy

This product carries our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date.

Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.

Please download, review and follow the instructions outlined in our Return, Exchange, Warranty Form before shipping any product(s).

Warranty Exclusions

Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.

Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.

Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.

All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.

Warranty Claim Procedures

  • Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product(s) under warranty to verify that warranty is still in effect.
  • Please place a clearly marked copy of the original invoice on the outside of product packaging.
  • Please include a short note stating the problem you are experiencing.
  • Products must be shipped back to Trail-Gear Inc. at the expense of the customer.

Shipping Address

Ship all products to:

Trail-Gear, Inc.
Attn: Warranty
5356 E. Pine Avenue
Fresno, CA 93727

Important Notes:

  • If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. Completing the steps above will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repair.
  • Customers outside of the United States should email the warranty department at sales@trail-gear.com to receive further instructions. These customers may have the option to "field destroy" an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2023 Trail-Gear, Inc. All rights reserved.