|
3.0L V6
Adapter Plate
This adapter
plate allows one or more gear driven transfer case(s) to
be bolted up to 1988-1995 Toyota 3.0L V6 5 speed transmissions. Our updated design does
not require modification to the transmission
for installation thanks to the use of
countersunk mounting hardware. Another
exclusive feature is the use of all nine
transmission mounting
bolts on both single and
dual case installations.
With our V6
adapter plate you can install the legendary
Toyota gear driven transfer case(s) in your
trail rig. These
cases are known for their strength,
reliability and configuration flexibility.
With the correct adapter plate you can put
one, two or even three transfer cases into
your truck. Each case can have stock 2.28 gears
or 4.70 low range gears installed.
Extensive
vehicle modifications are required for
installation including: retubing both front
and rear drive shafts, additional floorboard
hole for the second transfer case shifter,
speedometer cable extension, and crossmember
replacement.
Note: One top
shift case will be needed to perform this
conversion, for duals, both cases need to be
top shift.
 |
V6 Adapter Kit, 3.0 V6 88-95, $299, 100086-1-K |
|
Install
Instructions
