Long travel shocks are an important part of a flexible off road suspension system. Bilstein shocks are world renown for quality and performance. Available in 10", 12" and 14" lengths. 255/70 Valving. Also see Shock Hoops

	Bilstein 5125 14" Shock, $75 each, 110009-1
	Bilstein 5125 12" Shock, $75 each, 110008-1
	Bilstein 5125 10" Shock, $75 each, 110007-1
	Replacement Shock Sleeve, $1 each (see photo), 110045-1

Note:  All shocks sold by Trail-Gear include sleeves for both top and bottom bolts. 10" & 12" shocks include black shock boot, 14" shock does not include boot due to the extended travel range of the shock.

5150 model Bilstein shocks (listed below) include a fixed external fluid reservoir. Available in 12" and 14" lengths. 255/70 Valving.

	Bilstein 5150 14" Shock, $99 each, 110068-1
	Bilstein 5150 12" Shock, $99 each, 110067-1

These are the ones that started it all for Fox Racing Shox.  Invented by Bob Fox in 1974, designed specifically for rock rigs, pre-runners, and sand cars.  These shocks are completely adjustable to accommodate a wide range of suspension loads.

Air shock setup tech.

Features:

• 2.0" diameter race proven shocks
• 1 1/4" shaft
• Can be tuned and/or completely rebuilt
• Black, Cadmium finish

Specifications:

• Mounting Dimensions: 1/2" bolt diameter x 1 1/4"
• Optional spacers: 1 1/2"
• Mounting Specs: 1 1/4" Shaft
• Max Load: 500 lbs.
• Travel: 14, 16, and 18

These shock mounts are designed to weld directly on to the axle housing. Can be used for front or rear axle applications. Made from 3/16" plate steel. Mounts have curved bottoms that can be mounted horizontally or vertically on axle. Mount is 2.5" tall with 1/2" shock mount holes.

Lower Shock Mounts, $15 pair, 110046-1-K

Bumpstops are used to prevent over-flexing of leaf springs and shocks. Bumpstops can be bolted or welded in place. We recommend welding bumpstops to top of the u-bolt flip kit plate.

Bumpstops are 2" wide by 5 1/4" long by 2 1/4" tall

Bumpstop, $19 pair 140053-1-K

When installing leaf springs it's important to have bumpstops to limit how far the leaf springs compress. These easy to weld on extensions make installing bumpstops quick and easy. Extensions weld directly to the frame. Bumpstops are welded to the top of the U-bolt flip plates. Recommended for use with 86-95 Pickup's & 4Runners.

Bumpstop Extension, $19 pair, 140018-1-K

Get two bumpstops and two extensions for one great low price!

Bumpstop and Extension Kit, $35, 140054-1-K