| |
 |
|
|
|
Creeper Joints
These heavy duty rod ends
are ideal for today's flexible suspension systems. Super strong,
Creeper Joints will hold up to years of punishment. The
outer shell is a single forged piece. The inner flex
ball is made from 8620 tool steel and rides on high
quality polyurethane bushings. Heavy-duty, hardened
steel washers hold the joint together. Creeper Joints
are super flexible and allow for up to 40 degrees of
movement when used with spacers. A threaded grease fitting is provided on
top for lubrication. The flex ball is drilled for cross
lubrication flow from the shell to the link mount bolt.
Each joint includes a jam nut!
Three different flex ball
sizes; 9/16", 5/8" & 18mm, allow you to choose the right
size to match your application. The threaded section is
1-1/4" in diameter with 12 threads per inch.
Creeper Joints are also
available in a shackle mount for use with leaf springs.
Using a Creeper Joint on the shackle end of a leaf
spring reduces spring binding and increases suspension
flex. Creeper Joint shackle mounts are sold in pairs and
do not include the shackles, bolts or spring bushings.
| |
9/16" |
5/8" |
18mm |
|
Right Thread |
|
$35
(110758-K) |
 |
|
|
$35
(110759-K)
|
|
|
|
$35 (110757-K) |
|
|
|
Left Thread |
|
$35
(110761-K) |
|
|
|
$35
(110762-K)
|
|
|
|
$35 (110760-K) |
|
|
|
Shackle Mount (pair) |
|
$79
(110767-K) |
|
|
|
$79 (110768-K) |
|
|
|
$79 (110766-K) |
|
|
|
 
 |
|
Tie
Rod Kit
Trail-Gear has made the perfect kit
for building tie rod links for use
with a double-ended ram. Based on
our testing and experience with kits
like these, we know that the failure
point is always in the tie rod ends,
which is why Trail-Gear uses only
our own brand of Chromo Rod Ends.
The main body of each rod end is
100% 4340 chromoly, and the ball of
each rod end is made out of AISI
52100 material and then hard
chrome-plated for an extremely tough
finish. We also added tie rod
tubing that is 100% seamless DOM,
and to top it off the weld in bungs
are machined out of solid billet.
With these components in place we
feel that this kit is so strong it
stands apart from every other kit on
the market.
This kit is also perfect match for
our Rock Assault™ Double Ended Ram
and Clevis Kits.
|
 Kit
Includes:
-
(2) Tie rod tubing (100% DOM)
-
(2) Right-hand threaded rod
ends (Chromoly)
-
(2) Left-hand threaded rod ends
(Chromoly)
-
(2) Right-hand threaded jam nut
-
(2) Left-hand threaded jam nut
-
(2) ¾”-16 right-hand threaded
weld-on bung (Billet)
-
(2) ¾”-16 left-hand threaded weld-on
bung (Billet)
 |
Tie Rod Kit,
Full Hydro, $135, 130291-1-K |
|
|
| |
|
Threaded Bungs
1.25" Thread
Bungs are welded into tubing
to create suspension and setting links. Thread
size 1.25 - 12. For use on tubing with a 1.5" ID. Left
threaded parts are identified by machined groove, (not
shown).
|
|
Link Bung, 1.25
Inch, Right Thread,
$10, 110074-1 |
|
|
Link Bung, 1.25
Inch, Left Thread, $10, 110113-1 |
|
 |
|
|
Threaded Bungs 1"
Thread
Bungs are welded into tubing
to create suspension and setting links. Thread
size 1" - 14. For use on tubing with a 1.5" ID. Left
threaded parts are identified by machined groove, (not
shown).
|
|
Link Bung, 1
Inch, Right Thread, $10, 110123-1 |
|
|
Link Bung, 1
Inch, Left Thread, $10, 110124-1 |
|
 |
|
|
Threaded Bungs
7/8" Thread
Bungs are welded into tubing
to create suspension and setting links. Thread
size 7/8" - 14. For use on tubing with a 1" ID. Left
threaded parts are identified by machined groove (shown
in photo).
|
|
Link Bung, 7/8
Inch, Right Thread, $10, 110121-1 |
|
|
Link Bung, 7/8
Inch, Left Thread, $10, 110122-1 |
|
 |
|
|
Threaded Bungs
3/4" Thread
Bungs are welded into tubing
to create suspension and setting links. Thread
size 3/4" - 16. For use on tubing with a 1" ID. Left
threaded parts are identified by machined groove (not
shown).
|
|
Link Bung, 3/4
Inch, Right Thread, $10, 1100136-1 |
|
|
Link Bung, 3/4
Inch, Left Thread, $10, 110137-1 |
|
 |
|
Misalignment Spacers
Misalignment spacers are sold
in pairs.
Note:
Standard misalignment spacers are only
used when the width of the ball is too
narrow for the bracket it is being used
with.
|
Part # |
Rod End Bore
Size |
Bolt Size |
Mounting Width
w/Rod End |
Misalignment
Angle |
Price |
|
|
186008-K |
3/4" |
1/2" |
1.75" |
34° |
$13.99 |
|
|
186029-K |
3/4" |
9/16" |
1.75" |
32° |
$13.99 |
|
|
186009-K |
3/4" |
5/8" |
1.75" |
30° |
$13.99 |
|
|
186010-K |
7/8" |
1/2" |
2.0" |
34° |
$13.99 |
|
|
186030-K |
7/8" |
9/16" |
2.0" |
32° |
$13.99 |
|
|
186011-K |
7/8" |
5/8" |
2.0" |
30° |
$13.99 |
|
|
186012-K |
7/8" |
3/4" |
2.0" |
30° |
$13.99 |
|
|
186031-K |
1.0" |
9/16 |
2.625" |
36° |
$13.99 |
|
|
186013-K |
1.0" |
5/8" |
2.625" |
34° |
$13.99 |
|
|
186014-K |
1.0" |
3/4" |
2.625" |
32° |
$13.99 |
|
|
 |
|
|
Rod Ends
Don't be
fooled by lookalike rod ends, they are not
all the same. Trail-Gear rod ends are the
strongest on the market, tested, and proven.
The main body of this rod end is 100% 4340
chromoly and then finished with a zinc
coating, the ball is made out of AISI 52100
material and then hard chrome-plated for a
tough finish. The liner is made out of a
teflon. The best part is that there is no
need to pay for jam nuts, because Trail-Gear
rod ends come with them.
Features:
- Steel
alloy body
- Heat
treated
- Zinc
plated
- Teflon
lined
Items in red are on sale!
|
TG Kit Part #'s |
Industry
Standard Part #'s |
Bore Size |
Thread |
Load Rating |
Price |
|
|
186027-K |
JMX12T |
.750" |
3/4-16 |
28,100 lb |
$32 |
|
|
186028-K |
JMXL12T |
.750" |
3/4-16 LH |
28,100 lb |
$32 |
|
|
186025-K |
JMX14T |
.875" |
7/8-14 |
55,700 lb |
$55 |
|
|
186026-K |
JMXL14T |
.875" |
7/8-14 LH |
55,700 lb |
$55 |
|
|
186023-K |
JMX16T |
1.00" |
1-14 |
107,183 lb |
$70 |
|
|
186024-K |
JMXL16T |
1.00" |
1-14 LH |
107,183 lb |
$70 |
|
|
186021-K |
JMX16T-1 |
1.00" |
1-1/4-12 |
107,183 lb |
$70 |
|
|
186022-K |
JMXL16T-1 |
1.00" |
1-1/4-12 LH |
107,183 lb |
$70 |
|
|
Testing Machine:
 |
|
|
2" DOM Link
Material
Heavy duty link
material. Made from seamless DOM. 2" OD, 1.5" ID, .25
wall. Ideal for use with link ends and bungs listed
above. $1.80 per inch.
If ordering online you
can change the total
quantity to the total number of inches you wish to
purchase after you click the shopping cart.
Please include cut lengths in the notes section if
ordering more then one link. Maximum shippable
length 5'.
Example, If you want two
lengths that are 36" long each, then enter a quantity of
72" and in the notes section enter "Two lengths at 36"
each". We will cut your order and ship it out within one
day.
|
|
2 Inch DOM Link
Tubing, $1.80 per inch, 110083-1 |
|
 |
|
|
Toyota Four Link
Axle Mount Upper link mount
fits Toyota housing.
|
|
Axle Housing Upper
Link Mount Bracket, Toyota Housing, $129,
110116-1-K |
|
 |
|
|
|
|
|
|
|
