TG Ready to
Run (RTR) Competition Kit
|
| This
kit is competition ready right out of the box,
nothing else is required except the time to
assemble it, and for a few extra bucks we will
do that for you. We based the kit off of Axial's
ARTR kit, which is also the newest offering from
Axial, and it comes with several new components
meant to make this the most competitive
competition ready AX10. The XC-1 body was
designed specifically for rock crawling, and it
allows for optimum tire/wheel clearance while
having a full scale realistic look. Attacking
the terrain is also no problem with competition
level Pro-line Hammer tires and memory foams.
These added features give this crawler all the
advantages straight out of the box to conquer
all terrain or the competition, but we took this
kit a few extra steps and included an R2
transmission for front dig, an Agressor SRX
radio, and added a 7.4v LiPo battery to the
combo to give it the power needed to compete on
even the hardest of courses.
The TG RTR
Competition Kit also includes the following
options:
|
 |
 TG
RTR Competition Kit, $750, 210115-1-K |
|
|
|
TG Ready to
Crawl (RTC) Kit
|
This Ready to Crawl (RTC) kit takes the
place of the Ready to Run kit (RTR) and is a
big improvement. The gears in the servo are
metal, the plastic links are much better
than the earlier links, and there is a spool
in the front and rear axle. You get a 55 T
motor, not the 27 T that came in the earlier
kits, and the included Pro Line tires are
proven on the rocks. You also get a much
smaller body that will be more fit for rock
crawling. All you will need to get crawling
is a battery and a charger.
-
Tires: Pro-Line 2.2 Hammers
-
Wheels: Axial 2.2 8 Hole beadlocks
(Satin Chrome)
-
Suspension: 3 link
Features:
-
Wheelbase: 304mm~320mm (12”~12.6”)
-
Width: 254mm (10”)
-
Height: 156mm (6.125”)
-
Weight: 1588g (3.5 lbs)
-
4WD
-
55T Electric Motor
-
14T pinion paired with an 87T spur
gear gives you wheel speed with
great low end torque
-
True Beadlocks: No Messy Glue!
-
Hi-quality Composite Plastic and
Metals
-
Durable (ESC) Electronic Speed
Controller: Hi-quality durable
forward and reverse speed controller
-
Hi-Torque Servo helps hold your line
when rock crawling (Now with metal
gears)
-
Solid Rear Axle lockouts improve
ground clearance when crawling
-
Slipper Clutch: Reduces gear wobble
for a more efficient drivetrain.
Allows a motor to work more
efficiently and greatly enhances the
durability of the drivetrain
-
Aluminum Chassis plates with a
molded nylon skid plate provide a
solid and rigid chassis
-
Ultra compact and lightweight
transmission
-
Rear axle is locked for better
traction
-
Full ball bearings
-
Overall gear ratio range from 15:1
to 74:1
-
Transmission: 2.6:1; center mounted
-
Differentials: Front - Locked
(spool) gear differential; Rear -
locked (spool)
-
Transmission: Single-speed
-
Drive Shafts: Universal front and
rear
|
Chassis
-
Wheelbase: 304mm~320mm (12”~12.6”)
-
Width: 254mm (10”)
-
Height: 156mm (6.125”)
-
Weight: 1588g (3.5 lbs)
-
Articulation: 70°
-
Ground Clearance: 79mm (3.125”)
Body
-
Length: 438mm (17.25”)
-
Width: 181mm (7.125”)
-
Height: 133mm (5.25”)
Electronics
-
Radio: 2 Channel
-
Servos: 1 Hi-Torque (Standard
Size) (Metal Gears)
-
Forward/Reverse ESC
-
Motor: 55T 540/550 Size
|
|
|
|
Axial RTC RC Rock
Crawler Kit, $240, 210138 |
|
|
|
AX9004 Axial
Almost Ready To Run Kit (ARTR)
|
The ARTR (All Most
Ready To Run) is a
factory built rolling chassis. Just add your
choice of electronics, and you'll be able to hit
the rocks in no time. The ARTR is also the
newest offering from Axial, and it comes with
several new components meant to make this the
most competitive competition ready AX10. The
XC-1 body was designed specifically for rock
crawling, and it allows for optimum tire/wheel
clearance while having a full scale realistic
look. Attacking the terrain is also no problem
with competition level Pro-line Hammer tires and
memory foams. These added features give this
crawler all the advantages straight out of the
box to conquer all terrain or the competition.
- Pre-built
version of the award winning AX10 Scorpion
Kit. Includes all the aluminum links in
anodized orange
- Pre-printed
orange XC-1 Body that was specifically
designed for competition rock crawling -
meets 2.2 class rules.
- Pro-Line M2
Hammers tires are designed to resist
side-wall tire rollover and utilizes a super
soft M2 compound. Pro-Line Memory Foams
allow for greater tire flex, added
stability, larger contact patch, and less
bounce action.
- Rear axle
lockouts prevent hang-ups on the rear axle.
- Heavy duty
sintered lockers front and rear
- High
clearance lower links installed on the rear
to prevent hang-ups on the rocks.
- Matte chrome
8 hole beadlocks with orange rock rings.
Re-use your wheel. No messy glue required.
Features:
- Complete
competition ready kit
- All new
axles that feature an improved driveshaft
angle and caster as well as class leading
steering throw
- Aluminum
chassis plates with a molded nylon skid
plate
- Ultra
compact and lightweight transmission
- Full time
locked four wheel drive
- Full ball
bearings
- Overall gear
ratio range from 15:1 to 74:1
-
Transmission: 2.6:1; center mounted
-
Differentials: Locked style (spool)
-
Transmission: Single-speed
- Suspension:
3 link
- Drive
Shafts: Universal front and rear composite
Chassis:
- Wheelbase:
304mm~320mm (12”~12.6”)
- Width: 254mm
(10”)
- Height:
156mm (6.125”)
- Weight:
1588g (3.5 lbs)
-
Articulation: 70°
- Ground
Clearance: 79mm (3.125”)
Requires the
following electronics:
- 2 Channel
Radio
- 1 Standard
Size Servo
- Electronic
Speed Control
- 540 or 550
Size Motor
- 7.2v Stick
Battery Pack
|
|
|
Axial AX10 AX90004 ARTR Kit, $224.99, 210036 |
|
 |
|
|
|
|
